888.212.6796

Online Store

Category
Width
Pitch
Diameter
Pitch
Length
Size Fraction
Inner Diameter
Outer Diameter
Thickness
Hole Diameter
Clamping Diameter
Material
Finish
Inch/Metric
Pitch Type
Industry Standard
Price
Package Type

Trinity Hardware Headquarters
888-232-1010
 
(563) 344-0251

Set Descending Direction
per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. M8 - 1.25 X 50MM ANSI HEX HEAD CAP SCREW 8.8 ZNCLR

    M8 - 1.25 X 50MM ANSI HEX HEAD CAP SCREW 8.8 ZNCLR

    Package Qty: 50
    Medium carbon steel, quenched and tempered in accordance with SAE J1199 material requirements and ANSI/ASME B18.2.3.1m dimensional tolerances. Compatible with class 8 hex nuts, all metal lock nuts or nylon insert locknuts. Metric mild-steel or hardened flat washers as well as helical spring lock washers may also be used with these cap screws for a complete assembly. Cap screws are zinc clear finish.
  2. M10 - 1.5 X 20MM ANSI HEX HEAD CAP SCREW 10.9 ZNYEL

    M10 - 1.5 X 20MM ANSI HEX HEAD CAP SCREW 10.9 ZNYEL

    Package Qty: 50
    Medium carbonAlloy steel, quenched and tempered in accordance with SAE J1199 material requirements and ANSI/ASME B18.2.3.1m dimensional tolerances. Compatible with class 10 hex nuts, all metal lock nuts or nylon insert locknuts. Metric mild or hardened flat washers as well as helical spring lock washers may also be used with these cap screws for a complete assembly. Cap screws are zinc yellow finish.
  3. 5/8 - 11 FINISHED HEX NUT SAE GR 8 J995 ZNYEL

    5/8 - 11 FINISHED HEX NUT SAE GR 8 J995 ZNYEL

    Package Qty: 73
    Hex nuts for applications of all types. Manufactured in accordance with SAE J995 material requirements and ASME B18.2.2 dimensional tolerances. Suitable for use with B7Alloy threaded rod, grade 8 hex head cap screws or other grade 8 bolts. Meets or exceed SAE J995 Grade 8 specifications.
  4. M6 - 1 X 40MM DIN 6921 HEX FLANGE SCREW 10.9 ZNPO

    M6 - 1 X 40MM DIN 6921 HEX FLANGE SCREW 10.9 ZNPO

    Package Qty: 100
    Also known as "Frame Bolts" these screws are a hex screw and washer head all in one. The larger bearing surface distributes clamp load over a larger surface area.
  5. M20 - 2.5 X 55MM ANSI HEX HEAD CAP SCREW 8.8 ZNCLR

    M20 - 2.5 X 55MM ANSI HEX HEAD CAP SCREW 8.8 ZNCLR

    Package Qty: 5
    Medium carbon steel, quenched and tempered in accordance with SAE J1199 material requirements and ANSI/ASME B18.2.3.1m dimensional tolerances. Compatible with class 8 hex nuts, all metal lock nuts or nylon insert locknuts. Metric mild-steel or hardened flat washers as well as helical spring lock washers may also be used with these cap screws for a complete assembly. Cap screws are zinc clear finish.
  6. M12 - 1.75 X 110MM ANSI HEX HEAD CAP SCREW 10.9 ZNYEL

    M12 - 1.75 X 110MM ANSI HEX HEAD CAP SCREW 10.9 ZNYEL

    Package Qty: 10
    Medium carbonAlloy steel, quenched and tempered in accordance with SAE J1199 material requirements and ANSI/ASME B18.2.3.1m dimensional tolerances. Compatible with class 10 hex nuts, all metal lock nuts or nylon insert locknuts. Metric mild or hardened flat washers as well as helical spring lock washers may also be used with these cap screws for a complete assembly. Cap screws are zinc yellow finish.
  7. 1/2 - 13 X 1 1/2" HEX HEAD CAP SCREW SAE GR 5 J429 ZNCLR

    1/2 - 13 X 1 1/2" HEX HEAD CAP SCREW SAE GR 5 J429 ZNCLR

    Package Qty: 54
    Medium carbon steel, quenched and tempered in accordance with SAE J429 material requirements and ANSI/ASME B18.2.1 dimensional tolerances. Compatible with UNC grade 5 hex nuts, all metal lock nuts or nylon insert locknuts. USS or SAE mild steel or hardened flat washers as well as helical spring lock washers may also be used with these cap screws for a complete assembly. Cap screws are zinc clear finish.
  8. 1/4 - 20 X 36" FULLY THREADED STRAIGHT ROD SAE GR 8 J429 PLAIN

    1/4 - 20 X 36" FULLY THREADED STRAIGHT ROD SAE GR 8 J429 PLAIN

    Package Qty: 1
    Manufactured to SAE Grade 8 specifications. Used in a variety of fastening applications such as structural fastening, hanging, wall mounting and bracing. All are three foot lengths. Rods are plain finish.
  9. 1/2 - 13 X 1 3/4" HEX HEAD CAP SCREW SAE GR 8 J429 ZNYEL

    1/2 - 13 X 1 3/4" HEX HEAD CAP SCREW SAE GR 8 J429 ZNYEL

    Package Qty: 44
    Alloy steel, quenched and tempered in accordance with SAE J429 material requirements and ANSI/ANSI B18.2.1 dimensional tolerances. Compatible with UNC grade 8 hex nuts, all metal lock nuts or nylon insert locknuts. USS or SAE hardened flat washers as well as helical spring lock washers may also be used with these cap screws for a complete assembly. Cap screws are zinc yellow finish.
  10. M14 - 2 X 70MM ANSI HEX HEAD CAP SCREW 10.9 ZNYEL

    M14 - 2 X 70MM ANSI HEX HEAD CAP SCREW 10.9 ZNYEL

    Package Qty: 10
    Medium carbonAlloy steel, quenched and tempered in accordance with SAE J1199 material requirements and ANSI/ASME B18.2.3.1m dimensional tolerances. Compatible with class 10 hex nuts, all metal lock nuts or nylon insert locknuts. Metric mild or hardened flat washers as well as helical spring lock washers may also be used with these cap screws for a complete assembly. Cap screws are zinc yellow finish.
  11. M24 - 3 X 130MM ANSI HEX HEAD CAP SCREW 10.9 ZNYEL

    M24 - 3 X 130MM ANSI HEX HEAD CAP SCREW 10.9 ZNYEL

    Package Qty: 1
    Medium carbonAlloy steel, quenched and tempered in accordance with SAE J1199 material requirements and ANSI/ASME B18.2.3.1m dimensional tolerances. Compatible with class 10 hex nuts, all metal lock nuts or nylon insert locknuts. Metric mild or hardened flat washers as well as helical spring lock washers may also be used with these cap screws for a complete assembly. Cap screws are zinc yellow finish.
  12. 1/4 - 20 X 1 1/4" HEX HEAD CAP SCREW SAE GR 8 J429 ZNYEL

    1/4 - 20 X 1 1/4" HEX HEAD CAP SCREW SAE GR 8 J429 ZNYEL

    Package Qty: 247
    Alloy steel, quenched and tempered in accordance with SAE J429 material requirements and ANSI/ANSI B18.2.1 dimensional tolerances. Compatible with UNC grade 8 hex nuts, all metal lock nuts or nylon insert locknuts. USS or SAE hardened flat washers as well as helical spring lock washers may also be used with these cap screws for a complete assembly. Cap screws are zinc yellow finish.
  13. 5/8 - 11 FINISHED HEX NUT SAE GR 2 J995 ZNCLR

    5/8 - 11 FINISHED HEX NUT SAE GR 2 J995 ZNCLR

    Package Qty: 68
    Hex nuts for applications of all types. Suitable for use with low carbon threaded rod, grade 2 hex head cap screws or other grade 2 bolts. Meets or exceeds SAE J995 Grade 2 specifications. Manufactured in accordance with SAE J995 material requirements and ASME B18.2.2 dimensional tolerances.
  14. M8 - 1.25 X 90MM ANSI HEX HEAD CAP SCREW 8.8 ZNCLR

    M8 - 1.25 X 90MM ANSI HEX HEAD CAP SCREW 8.8 ZNCLR

    Package Qty: 25
    Medium carbon steel, quenched and tempered in accordance with SAE J1199 material requirements and ANSI/ASME B18.2.3.1m dimensional tolerances. Compatible with class 8 hex nuts, all metal lock nuts or nylon insert locknuts. Metric mild-steel or hardened flat washers as well as helical spring lock washers may also be used with these cap screws for a complete assembly. Cap screws are zinc clear finish.
  15. 3/8 - 16 X 4" HEX HEAD CAP SCREW SAE GR 8 J429 ZNYEL

    3/8 - 16 X 4" HEX HEAD CAP SCREW SAE GR 8 J429 ZNYEL

    Package Qty: 38
    Alloy steel, quenched and tempered in accordance with SAE J429 material requirements and ANSI/ANSI B18.2.1 dimensional tolerances. Compatible with UNC grade 8 hex nuts, all metal lock nuts or nylon insert locknuts. USS or SAE hardened flat washers as well as helical spring lock washers may also be used with these cap screws for a complete assembly. Cap screws are zinc yellow finish.
  16. 1 - 8 FINISHED HEX NUT SAE GR 5 J995 ZNCLR

    1 - 8 FINISHED HEX NUT SAE GR 5 J995 ZNCLR

    Package Qty: 18
    Hex nuts for applications of all types. Suitable for use with low carbon threaded rod, Grade 5 hex head cap screws or other grade 5 bolts. Meets or exceeds SAE J995 Grade 5 specifications. Manufactured in accordance with SAE J995 material requirements and ASME B18.2.2 dimensional tolerances.
Set Descending Direction
per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5