888-212-6796

Return to Product Catalog Pages

 

Bolt Catalog Pages

No. 3 Dome Head Plow Bolt
#3 Dome Head Plow Bolts
No. 3 Dome Head Plow Bolt
#3 Dome Head Plow Bolts 
3 Oversized Head Plow Bolts
#3 Oversized Head Plow Bolts 
 No. 3 Repair Head Plow Bolt
#3 Repair Head Plow Bolts
 No. 4 Head Plow Bolts
#4 Head Plow Bolts
 No. 7 Repair Head Plow Bolts
#7 Repair Head Plow Bolts
 Contour Head Plow Bolts
Contour Head Plow Bolts
 Clipped Head Plow Bolts
Clipped Head Plow Bolts
 Plow Bolt and Nut Kits
Plow Bolt and Nut Kits
 Metric Plow Bolts
Metric Plow Bolts
No. 7 Head Bucket Tooth Plow Bolts
#7 Head Bucket Tooth Plow Bolts 
Shaker Screen Bolts 

Shaker Screen Bolts
Full Thread Carriage Bolts
Full Thread Square Neck Round Head

 
 Carriage Bolts
Carriage Bolts
 Short Neck Carriage Bolts 
Short Neck Carriage Bolts

Ribbed Neck Carriage Bolt
Ribbed Neck Carriage Bolts  

Round Bend U Bolts
Round Bend U Bolts 
Square Bend U Bolts
Square Bend U Bolts 
Triangular Bend U Bolts
Triangular Bend U Bolts
Hook Bolts
Hook Bolts  
Forged Eye Bolts
Forged Eye Bolts
Square Head Bolts
Square Head Bolts  
 
Elevator Bolts
Elevator Bolts
ASTM A325 Heavy Hex Structural Bolts
ASTM A325 Heavy Hex Structural Bolts .
 Fully Threaded Cap Screws
Fully Threaded Cap Screws
May be used in applications where tap bolts would be used
Tap Bolts
Tap Bolts 
 Hex Head Bolts
Hex Head Bolts
Place Bolts
Place Bolts
Hex Head Wheel Bolts
Hex Head Wheel Bolts  
Round Head Wheel Bolts
Round Head Wheel Bolts  
Hex Flange Bolt
Hex Flange Bolt 
   

 

Return to main catalog menu

ASTM A325 Heavy Hex Structural Bolts
ASTM A325 Heavy Hex Structural Bolts provides a structural joint that is stronger both statically and in fatigue than a joint made with hot driven rivets. 

A325 Structural Bolts can be used with a heavy nut and two hardened washers with one under the nut and the other under the bolt head to provide a uniform surface on rough material.  They can be assembled in holes which drilled, punched, or reamed.  ASTM A325 Structural Bolts are used in structural steel construction of all types of bridges, buildings, and other steel structures.  They are forged from medium carbon steel and heat treated to meet the requirements of ASTM spec.

Tap Bolts
Tap bolts are fully threaded hex head bolts. Used in construction, agriculture and automotive applications, tap bolts are designed to be used in a drilled or tapped hole where a cap screw or stud would be impractical.  Our current tap bolt line can be viewed here.

Hex Head Bolts

Place Bolts-  (Hex Cap Screws- Type AA Place Head- 6 slot)
Place bolts are free-spinning, self-locking hex head bolts used to prevent loosening due to vibration.  The circular recess under the head and slots in the top of the head work together to cause the head to form an elastic flexing of the head as it is tightened. Its one-piece locking design eliminates extra parts and extra installation steps saving time and money,


Hex Flange Bolts (Frame Bolts)
Also known as "Frame Bolts" these screws are a hex screw and washer head all in one. Parts meet or exceed ASME/ANSI B18.2.1, SAE J429, SAE J1061 for Grade 8 material specifications.

Elevator Bolts (Belt Bolts)
These bolts have a wide, flat, countersunk head.  The elevator bolts' square neck prevents rotation.   The head diameter is slightly over three times that of the bolt body. The large, low head shape provides a flush wide bearing connection in soft materials.  

Wheel Bolts

Square Head Bolts

Forged Eye Bolts
Eye bolts have a looped head that is forged without welds.These bolts should not be used for angular loads.

Bent Bolts-
Bent bolts are cylindrical rods having one end threaded and the other end bent to a specific configuration.  They do not have a standard head and are used in applications where a formed shape is needed for assembly purposes.

Round Bend U Bolts-
Round Bend U Bolts are often used for attaching pipe or hanging pipe.  Round Bend U Bolts also can be used as an anchor when embedded in concrete.


Hook Bolts-

J-Bolts (63° Hook Bolts)
Known as 63° Hook Bolts, these are designed for shaker screen applications. Our newest line, for the mining and quarry industry, are our 63° hook bolts for shaker screen applications. Made of heat treated steel in plain finish, they are in stock in 1/2" diameter from 4" to 7" lengths and 5/8" diameters from 5" to 8" lengths.

 

U-Bolts-  A u-shaped bent bolt having threads on both ends.

Eye Bolts

Plow Bolts

Shaker Screen Bolts (Fully threaded Carriage Bolts)
Shaker Screen Bolts feature a low profile head and are desigened for wood-to-wood or wood-to-metal applications.  When used in square punched holes, they prevent turning when nut is tightened.  They allow a flexible installation as fastener can be installed from the nut side of the assembly. Shaker Screen Bolts are used in the snow plow applications and rock crushing industries.

Carriage Bolts
Carriage Bolts are also known as square neck round head bolts.  Their square neck on shank is designed for use in square punched holes which prevents turning when nut is tightened.